After male masturbators are used in a damp environment, appropriate drying methods should be adopted to ensure hygiene and safety. The following are several effective drying methods:
First, the basic drying steps
Initial wiping
Use a clean towel or tissue to gently absorb the moisture on the surface of the masturbator. For products that can be flipped over, you can directly wipe the inside and absorb the moisture.
Thoroughly dry
If there is still moisture remaining after wiping with a towel, especially for non-through products, you can use a hair dryer (cool mode) to dry the internal channels and external surfaces. Make sure it is completely dry to prevent the growth of mold spots.
Second, detailed drying methods
Air-dry naturally
If conditions permit, the masturbation device can be placed in a well-ventilated area free from direct sunlight to dry naturally. Avoid using hot air or direct sunlight to prevent damage to the product material.
Use desiccants
Placing an appropriate amount of desiccants, such as silica gel desiccants, inside and outside the masturbation device can effectively absorb residual moisture and prevent mold. Desiccants need to be replaced regularly to ensure their water absorption effect.
Professional drying tools
You can consider using drying tools specially designed for sex toys, such as diatomite moisture-absorbing rods, etc. These tools usually have a high water absorption efficiency and can quickly dry the moisture inside and outside the masturbator.
Third, precautions
Avoid using hot air or direct sunlight
Hot wind or direct sunlight may cause the product material to age, deform or be damaged, so it should be avoided.
Dry thoroughly after cleaning
Before drying, make sure the masturbation device has been thoroughly cleaned to prevent bacterial growth.
Store properly
After drying, place the masturbation device in a clean storage bag or box, avoiding contact with other items, and store it in a dry, well-ventilated and clean environment.
Fourth, handling of special circumstances
Electric masturbator
If an electric masturbator is used, after being used in a humid environment, in addition to drying treatment, it is also necessary to check whether the electronic components are damp. If moisture is found, the electronic components should be disassembled immediately and dried with a hair dryer (cool mode) to ensure they are completely dry before use.
A masturbator that has not been used for a long time:
If the masturbation device has not been used for a long time, it should be thoroughly cleaned and disinfected before being used again, and dried to prevent the growth of mold spots.
Through the above drying methods, the hygiene and safety of male masturbation devices after use in a humid environment can be effectively guaranteed, and the service life of the product can be prolonged.
